This special preparation uses acrylic resins that have a high ability to penetrate concrete surfaces. This results in increased hardness and solidity, while also providing a satin shine. The process involves molecular vitrification of the already hardened concrete.
To ensure proper anchoring, it is crucial that the surface being treated is completely clean and dry. This means it should be free of dust, grease, oil, plaster, cement, or paint stains. If cleaning is done with water, it is absolutely necessary that the surface is dry before applying the coating.
For concrete floors, it is recommended to use mechanical or chemical means for preliminary cleaning, followed by rinsing with plenty of water and allowing it to dry.
The product can be applied using a brush, roller, or spray gun, with thin layers being more effective than thick ones. It is best to apply three thin layers rather than two thick ones, with the same amount of product being used. The average yield is around 3-5 m2 per kg, but this can vary significantly depending on the porosity of the substrate.
For concrete floors, it is recommended to use mechanical or chemical means for preliminary cleaning, followed by rinsing with plenty of water and allowing it to dry.
The product can be applied using a brush, roller, or spray gun, with thin layers being more effective than thick ones. It is best to apply three thin layers rather than two thick ones, with the same amount of product being used. The average yield is around 3-5 m2 per kg, but this can vary significantly depending on the porosity of the substrate.
1 litre containers.
Boxes of 12 units.
Complete pallets of 40 boxes.
5 litre containers.
Boxes of 4 units.
Complete pallets of 32 boxes.
10 litre containers.
Complete pallets of 80 units.
30 litre containers.
Complete pallets of 24 units.
Boxes of 12 units.
Complete pallets of 40 boxes.
5 litre containers.
Boxes of 4 units.
Complete pallets of 32 boxes.
10 litre containers.
Complete pallets of 80 units.
30 litre containers.
Complete pallets of 24 units.
Appearance -> Clear Liquid
Color -> Colorless, Red, Green
Specific Gravity -> 0.98
Flash Point -> 26 °C
Freezing Temperature -> -30 °C
Active Ingredient -> 20
Color -> Colorless, Red, Green
Specific Gravity -> 0.98
Flash Point -> 26 °C
Freezing Temperature -> -30 °C
Active Ingredient -> 20
Acrylic Polymers
Solvents
Solvents
Reviews
There are no reviews yet.