SELLAN AP

HERMETIZER COATING FOR INDUSTRIAL FLOORS (COLORLESS ANTI-DUST)

PROPERTIES  :
Special preparation based on acrylic resins with a high penetration capacity on the concrete surfaces, giving them a great hardness, solidity and a satin gloss at the same time, by molecular vitrification of the already set mass.

APPLICATIONS :
It is applied on any type of porous surface that allows its anchoring. In the industrial aspect it is unbeatable as a hermetizer of floors of old to new concrete, stone, porous brick, scratches, wood, cork, etc …
In industrial premises, warehouses, parking lots, offices …
In decorative applications can be used on exposed work walls, wood, cork, etc …, providing them with a colorful and pleasant finish.

HOW TO USE :
In any case it is essential to achieve an adequate anchor, that the surface to be treated is completely clean and dry, that is, free of dust, grease, oils, plaster stains, cement or paint. If cleaning is carried out in an aqueous medium, it is ESSENTIAL that the surface be dry before the coating is applied.
On concrete floors, it is advisable to perform pre-cleaning by mechanical or chemical means, rinsing with plenty of water in both cases and allowing to dry.
The product can be applied by brush, roller or gun, it is convenient to apply successive layers of little thickness each.
Better results are obtained with three thin layers than with two thick ones, the final amount being applied the same. The average yield obtained is about 3-5 m2 per kg, varying very significantly depending on the porosity of the substrate.

SAFETY ADVISES :
H226 Flammable liquids and vapors. H312 + H332 Harmful in contact with skin or if inhaled. H315 Causes skin irritation. P302 + P352 IF IN SKIN: Wash with plenty of water /… P304 + P340 IF INHALED: Transport the person outdoors and keep them in a position that makes breathing easier. P332 + P313 In case of skin irritation: Consult a doctor. P362 + P364 Remove contaminated clothing and wash before reuse. P370 + P378 In case of fire: Use a powder or CO2 extinguisher for extinction. P403 + P235 Store in a well ventilated place. Keep in a cool place. P303 + P361 + P353 IF IN SKIN (or hair): Immediately remove all contaminated clothing. Rinse skin with water / shower. Contains: xylene (mixture of isomers).

Type of packaging  :
1-5-10-30 Liter Bottles

RECORDS  :
Nº article: 101985
Industrial Register: 154069
Review / Data: 24 / February / 2019

PHYSICAL PROPERTIES :
Appearance : Transparent liquid
Color : Colorless, red, green
Density : 0.98
Tº inflammation : 26ºC
Freezing temperature : -30ºC
Current subject : 20%.

QUALITATIVE COMPOSITION :
Acrylic polymers
Solvents

 

WARNINGS:
The suggestions and recommendations on the use of our products meet our most knowledge at the time of writing this data sheet. We are not responsible for any possible negligence in handling. Compliance with all laws, including those in the protection of industrial property rests solely with the users of our products.