LIMSOLINOX PG

PICKLING GEL FOR STAINLESS STEEL WELDS

PROPERTIES  :
Potent stripper gel for stainless steel welds. Its main use is for cleaning and passivation of welding joints, weld seams, and sheet metal surfaces, among others. Suitable for MMA, MIG/MAG and TIG stainless steel welding processes.

HOW TO USE :
The product is applied as supplied with the help of the special brush included in the pack. The viscous gel adheres strongly to the material to be treated, making it ideal for use on both horizontal and vertical surfaces. Avoid contact with any metals other than stainless steel (AISI 304, 316 and similar) or its alloys. Prior to use, vigorously shake the container. Apply a uniform layer of gel to the area to be treated using the brush. The appropriate exposure time depends on the thickness of the weld and the type of stainless steel. For austenitic steels, such as 17-4, 304, and AISI 316, allow between 10-15 minutes of exposure; for alloys such as 455 or 589, allow an average of 25 minutes. Once the time has elapsed, proceed to clean the surface carefully with a natural fiber, plastic or wire brush and abundant water. Lastly, make sure that no trace residue remains on the treated surface.

SAFETY ADVISES :
H301+H331 Toxic if swallowed or if inhaled. H310 Fatal in contact with skin. H314 Causes severe skin burns and eye damage. P260 Do not breathe dust/fume/gas/ mist/vapours/spray. P262 Do not get in eyes, on skin, or on clothing. P264 Wash thoroughly after handling. P280 Wear protective gloves/protective clothing/eye protection/face protection. P301+P310 IF SWALLOWED: Immediately call a POISON CENTER / doctor. P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310 Immediately call a POISON CENTER/doctor. P361+P364 Take off immediately all contaminated clothing and wash it before reuse. P403+P233 Store in a well-ventilated place. Keep container tightly closed. EUH071 Corrosive to the respiratory tract.

WARNING :
Prior to working with the product, be sure to read the MSDS carefully to know which EPIs must be used.

Type of packaging  :
Pot 0.5 Liters
Boxes of 4 x 0.5 + brush

RECORDS  :
Nº article: 102395
Industrial Register: 154069
Review / Data: 18 / April / 2018

PHYSICAL PROPERTIES :
Appearance: Fluid gel
Color: Red
Odor: Hot spicy
Density: 1,084 gr / cc
100% pH: 1.0
Solubility: Soluble in water

QUALITATIVE COMPOSITION :
Inorganic acids
Thickeners

 

WARNINGS:
The suggestions and recommendations on the use of our products meet our most knowledge at the time of writing this data sheet. We are not responsible for any possible negligence in handling. Compliance with all laws, including those in the protection of industrial property rests solely with the users of our products.