GR AGC sp

COPPER ANTI-SEIZE GREASE SPRAY

PROPERTIES  :
Based on micro-particles of micronized copper compound, encapsulated in an organic matrix, reinforced with corrosion inhibitors, stable to chemical products and temperature resistant. Electricity grease conductor. It does not age or alter by the vibration effect. – it is not removed by water or steam.- Application from -30° C to 1200° C – I does not harden or lose qualities over time even in extreme conditions.

APPLICATIONS & DOSAGE :
It is the ideal product to anticipate and avoid seizures caused by: corrosion, chemical attack mechanical interlocks subjected to low and high temperature. It must be put in place before assembling the pieces to be protected, it is simply necessary a light layer. Spray a small amount of product directly on the surface with a separation of about 20-25 cm. Wait a few moments to evaporate the solvents, then mount the treated parts.

SAFETY ADVISES :
H222 Extremely flammable aerosol. H229 Pressurised container: May burst if heated. H319 Causes serious eye irritation. H336 May cause drowsiness or dizziness. H411 Toxic to aquatic life with long lasting effects. P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P211 Do not spray on an open flame or other ignition source. P25 Do not pierce or burn, even after use. P271 Use only outdoors or in a well-ventilated area. P273 Avoid release to the environment. P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P337+P313 If eye irritation persists: Get medical advice/attention. P410+P412 Protect from sunlight. Do no expose to temperatures exceeding 50 oC/122oF. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. EUH statements: EUH066 Repeated exposure may cause skin dryness or cracking. For professional users only

Type of packaging  :
400 ml aerosol.
Boxes of 12-24 units

RECORDS  :
Nº article: 101576
Industrial Register: 154069
Review / Data: 23 / May / 2017

PHYSICAL PROPERTIES :
Form: Spray
Colour: Copper
Density: 0,672 gr/cm3
Olor: Characteristic

QUALITATIVE COMPOSITION :
Mixture of isomers
Copper
Phosphorodithioic acid

 

WARNINGS:
The suggestions and recommendations on the use of our products meet our most knowledge at the time of writing this data sheet. We are not responsible for any possible negligence in handling. Compliance with all laws, including those in the protection of industrial property rests solely with the users of our products.