BRIGHT GALVANIZED COLD, QUICK DRYING SPRAY
Compound formulated with zinc and adhesive resins that prevent and stop oxidation in all types of steel and iron.
The final film contains 95% purity of zinc which ensures the protection of the surface. In the event of accidental scratches, an insoluble zinc oxide coating is formed which protects the metal base.
Brings to the substrate and elastic and lasting film, preventing the passage of radiation and heat. It is fast drying and contains no chlorinated solvents or any highly toxic. Non corrosive effects.
Adheres electrochemically on all kinds of metals.
Good adherence in all kinds of plastics. High resistance against aggressive media, diluted acids and caustic soda of low concentration.
Protects metallic surfaces from corrosion. It can be applied without subsequent sealing. Thermoresistant +200° C after 30 minutes.
On metal, galvanized surfaces and rims. Cathodic protection in welding joints. Machinery, automotive, air conditioning systems, carpentry, tanks, fittings, tools, pipes, etc …
INSTRUCTION FOR USE :
Clean the surface of oxides, fats or paints. Shake the spray vigorously and spray at a distance of 15-20 cm until a homogeneous layer is obtained.
After application invert the spray and spray to prevent the diffuser from becoming clogged.
SAFETY ADVISES :
H222 Extremely flammable aerosol. H229 Pressurised container: May burst if heated. H336 May cause drowsiness or dizziness. H411 Toxic to aquatic life with long lasting effects. P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P251 Do not pierce or burn, even after use. P271 Use only outdoors or in a well-ventilated area. P273 Avoid release to the environment. P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P403+P233 Store in a well-ventilated place. Keep container tightly closed. P410+P412 Protect from sunlight. Do no expose to temperatures exceeding 50 oC/122oF. EUH066 Repeated exposure may cause skin dryness or cracking. For professional users only.
Type of packaging :
400 ml. Spray
Box of 12-24 units.
Nº article: 101540
Industrial Register: 154069
Review / Data: 19 / May / 2017
PHYSICAL PROPERTIES :
Brinder : Ketonic
Color : Silver metallic
Viscosity 35-36 sec. Ford cup nº2 at 20ºC
Density : 0,87 – 0,91 gr./cc
Number of layers : 2 layers to obtain 40 microns
Theoretical performance : 8m2 a 10m2
Dry to the touch : 4 – 6 min. at 20ºC.
QUALITATIVE COMPOSITION :
The suggestions and recommendations on the use of our products meet our most knowledge at the time of writing this data sheet. We are not responsible for any possible negligence in handling. Compliance with all laws, including those in the protection of industrial property rests solely with the users of our products.