GALVANIZED SILVER QUICK DRYING SPRAY
Aluminum and zinc based protector that ensures the protection of the treated surfaces. The product contains specific resins that will not scratch and resists temperatures of up to 120° C, very fast drying.
Adds to the substrate and elastic and lasting film, preventing the passage of radiation and heat. It is fast drying without chlorinated solvents or any others of high toxicity.
It can be applied in all industry in general, being its most frequent use is in agriculture, bottling plants, construction, metallurgical, automotive, mining, naval sector, chemical plants, fences, welding joints, metallic components touch ups, etc. Very suitable to paint machinery of all kinds as well as iron structures requiring immediate manipulation after being painted.
INSTRUCTION FOR USE :
Clean the surface of oxides, fats or paints. Shake the spray vigorously and spray at a distance of 15-20 cm until a homogeneous layer is obtained.
After application invert the spray and spray to prevent the diffuser from becoming clogged.
SAFETY ADVISES :
H222 Extremely flammable aerosol. H229 Pressurised container: May burst if heated. H336 May cause drowsiness or dizziness. H411 Toxic to aquatic life with long lasting effects. P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P251 Do not pierce or burn, even after use. P271 Use only outdoors or in a well-ventilated area. P273 Avoid release to the environment. P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P403+P233 Store in a well-ventilated place. Keep container tightly closed. P410+P412 Protect from sunlight. Do no expose to temperatures exceeding 50 oC/122oF. EUH066 Repeated exposure may cause skin dryness or cracking. For professional users only.
Type of packaging :
400 ml. Spray Box of 12-24 units.
Nº article: 102360
Industrial Register: 154069
Review / Data: 19 / May / 2017
PHYSICAL PROPERTIES :
Binder : Nitrosynthetic
Color : Silver plated
Viscosity : 50 +/- 3 seg. Ford cup nº2 at 20ºC
Density : 0,96 grs./cc
Number of layers : 2 layers to obtain 40 microns
Theoretical perfomance : 3 m2 boat 520cc
Dry to the touch : 4 – 6 min. at 20ºC
Total drying : 6 hours.
QUALITATIVE COMPOSITION :
Metal powders AL and Zn (Zinc> 95% purity)
The suggestions and recommendations on the use of our products meet our most knowledge at the time of writing this data sheet. We are not responsible for any possible negligence in handling. Compliance with all laws, including those in the protection of industrial property rests solely with the users of our products.