STAINLESS STEEL LIQUID COATING SPRAY
Stainless steel liquid coating which adheres electrochemically to all kind of metals and also to some plastics. It has high resistance to diluted acids and hydroxides. Protects metallic surfaces from corrosion. Stops oxidation at an early stage. It can be applied without subsequent sealing. It is an elastic coating, resistant to impacts and scratches. Thermo-resistant (+275° C). It can be lacquered after 30 minutes.
APPLICATIONS AND INSTRUCTION FOR USE :
For application on metal or galvanized surfaces. Cathodic protection in solder joints. Machinery, automotive air conditioning systems, marine, railings, DIY, restoration tanks, fittings, tools, pipes, interior design and general industry, etc.
Cleaning the surface of residues of oxides, grease or paint. Shake vigorously the aerosol and spray from a distance of 15-20 cm until a homogeneous layer. After application and spray aerosol reverse to prevent clogging of the diffuser.
SAFETY ADVISES :
H222 Extremely flammable aerosol. H229 Pressurised container: May burst if heated. H336 May cause drowsiness or dizziness. P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P251 Do not pierce or burn, even after use. P271 Use only outdoors or in a well-ventilated area. P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P403+P233 Store in a well-ventilated place. Keep container tightly closed. P410+P412 Protect from sunlight. Do no expose to temperatures exceeding 50 oC/122oF. EUH statements: EUH066 Repeated exposure may cause skin dryness or cracking. EUH208 Contains níquel en polvo; [diámetro de partícula < 1 mm]. May produce an allergic reaction. For professional users only. Contains: isopropanol,isopropyl, alcohol,propan-2-ol, n-butyl acetate.
Type of packaging :
400 ml. Spray
Box of 12-24 units.
Nº article: 101035
Industrial Register: 154069
Review / Data: 31 / May / 2016
PHYSICAL PROPERTIES :
Form : Stainless Steel
Colour : Silver
Viscosity : 38-44 seg. (Copa Ford Nº12)
Density : 1 gr./cc
Purity Pig : 99.9%
Pressure spray : 4,8 kg. A 20ºC
Theoretical performance : 1m2 Boat 520ml
Spray life : >18 months
Covered area : >30 microns
Type of gas : Éter-dimetilico
Drying time : 3 min.
Polimeración compl. : 20ºC 50 hours
Weight spray aprox. : 402 grs.
QUALITATIVE COMPOSITION :
Stainless steel metal powders
The suggestions and recommendations on the use of our products meet our most knowledge at the time of writing this data sheet. We are not responsible for any possible negligence in handling. Compliance with all laws, including those in the protection of industrial property rests solely with the users of our products.