This product is an aluminium and zinc-based protector that safeguards treated surfaces. It is formulated with special resins that are resistant to scratches and can withstand temperatures of up to 120°C. The protector dries quickly and forms a strong, flexible film that blocks radiation and heat. It is also free of chlorinated solvents and other harmful chemicals.
To prepare the surface, remove any rust, grease, or paint residue. Shake the aerosol can thoroughly and spray from a distance of 15-20 cm until the surface is evenly coated. Once you have finished spraying, turn the can upside down and spray again to prevent the nozzle from clogging.
400 ml aerosol can.
Boxes of 12 units.
Complete pallets of 105 boxes.
Boxes of 12 units.
Complete pallets of 105 boxes.
Binder -> Nitrosynthetic
Color -> Silver Galvanized
Viscosity -> 50 +/- 3 sec. Ford Cup No. 2 at 20 °C
Density -> 0.96 g/cc
Number of Coats -> 2 coats to obtain 40 microns
Coverage -> 3 m2 pot 520cc
Touch Dry -> 4 - 6 min. at 20 °C
Total Drying Time -> 6 hours
Color -> Silver Galvanized
Viscosity -> 50 +/- 3 sec. Ford Cup No. 2 at 20 °C
Density -> 0.96 g/cc
Number of Coats -> 2 coats to obtain 40 microns
Coverage -> 3 m2 pot 520cc
Touch Dry -> 4 - 6 min. at 20 °C
Total Drying Time -> 6 hours
Nitrosynthetic resins
AL and Zn metal powders (Zinc> 95% purity)
AL and Zn metal powders (Zinc> 95% purity)
Reviews
There are no reviews yet.