Protector for chrome and stainless surfaces. It contains specific resins for quick dry.
Especially for metals, glass, wood, ceramics, as well as in most plastics.
It can be used throughout the industry in general, being its more frequent use in bottling plants, metallurgic plants, automotive, naval sector, locksmiths, chemical facilities, etc.
The application must be made on a clean surface free of grease, rust, paint, scale particles, etc.

It can be used in all the industry in general, being its most frequent use in bottling plants, metallurgical plants, automotive, naval sector, locksmiths, chemical installations, etc.
The application should be done on the clean surface of grease, rust, paints, husks etc.
Spray product, shake vigorously in inverted form until you start to hear the noise of the mixer inside the package.
Spray at a distance of 15/20 cm. Until a homogeneous layer is obtained.
Note : After finishing the work to be done, to clean the diffuser, invert the container and spray for a few moments..

H315 Causes skin irritation. H222 Extremely flammable aerosol. H229 Pressurised container: May burst if heated. H319 Causes serious eye irritation. H335 May cause respiratory irritation. H373 May cause damage to organs through prolonged or repeated exposure. P101 If medical advice is needed, have product container or label at hand. P102 Keep out of reach of children. P103 Read label before use. P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P211 Do not spray on an open flame or other ignition source. P251 Do not pierce or burn, even after use. P260 Do not breathe dust/fume/gas/mist/vapours/ spray. P271 Use only outdoors or in a well-ventilated area. P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P410+P412 Protect from sunlight. Do no expose to temperatures exceeding 50 oC/122oF. P501 Dispose of contents/ container to … EUH066 Repeated exposure may cause skin dryness or cracking.

Type of packaging  :
400 ml. Spray format.

Nº article: 101200
Industrial Register: 154069
Review / Data: 15 / November / 2016

Form : Stainless Steel
Colour : Silver
Viscosity : 38-44 sec. (Copa Ford nº12)
Density 1 gr./cc
Purity of pig. 99,9%
Spray pressure : 4,8 kg. at 20ºC
Theoretical yield : 1 m2 canister 520ml
Spray life : > 18 months
Covered área : > 30 microns
Type of gas : Éter – dimetilico
Drying time : 3 min. Approx.
Polymerization compl. 50 hours
Spray weight approx. : 402 gr.


The suggestions and recommendations on the use of our products meet our most knowledge at the time of writing this data sheet. We are not responsible for any possible negligence in handling. Compliance with all laws, including those in the protection of industrial property rests solely with the users of our products.